Messagesaver user guide – Multi-Tech Systems MT5634MSV User Manual
Page 54
MessageSaver User Guide
46
90
BLACKLIST FULL
Blacklist is full
100
*
CONNECT 28000
Connected at 28000 bps, 56K rate (V.90)
101
*
CONNECT 29333
Connected at 29333 bps, 56K rate (V.90)
102
*
CONNECT 30666
Connected at 30666 bps, 56K rate (V.90)
103
*
CONNECT 33333
Connected at 33333 bps, 56K rate (V.90)
104
*
CONNECT 34666
Connected at 34666 bps, 56K rate (V.90)
105
*
CONNECT 37333
Connected at 37333 bps, 56K rate (V.90)
106
*
CONNECT 38666
Connected at 38666 bps, 56K rate (V.90)
107
*
CONNECT 41333
Connected at 41333 bps, 56K rate (V.90)
108
*
CONNECT 42666
Connected at 42666 bps, 56K rate (V.90)
109
*
CONNECT 45333
Connected at 45333 bps, 56K rate (V.90)
110
*
CONNECT 46666
Connected at 46666 bps, 56K rate (V.90)
111
*
CONNECT 49333
Connected at 49333 bps, 56K rate (V.90)
112
*
CONNECT 50666
Connected at 50666 bps, 56K rate (V.90)
113
*
CONNECT 53333
Connected at 53333 bps, 56K rate (V.90)
114
*
CONNECT 54666
Connected at 54666 bps, 56K rate (V.90)
Terse
Verbose
Description
*
EC is added to these result codes when the extended result codes configuration option is enabled. EC is re-
placed by one of the following codes, depending on the type of error control connection:
V42bis —V.42 error control (LAP-M) and V.42bis data compression
V42 —V.42 error control (LAP-M) only
MNP5 —MNP 4 error control and MNP 5 data compression
MNP4 —MNP 4 error control only
NoEC —No error control protocol).