Motorola PTP 400 Series - Manual (Page 108)

106
Once section 7.7.10 “Aligning the ODUs” is complete pressing the “Disarm Installation Agent”
button completes the installation process 23 and the audible installation tone will be switched
off.
After disarming the wireless link the user is presented with an optional configuration page see
Figure 50. The screen presents hyperlinks to the main configuration and spectrum
management pages.
Figure 50 - Optional Post Disarm Configuration 2
Once the installer is satisfied with the wireless configuration options then the ‘Submit Wireless
Configuration’ button or the ‘Next’ link should be clicked.
23 The installation process is completed when both ends of the link are ‘disarmed’.