Motorola PTP 400 Series - Manual (Page 52)

50
7.4 Installation Support
Online installation support and contact details for your regional support can be found at
http://www.motorola.com/ptp
A Frequently Asked Questions (FAQ) section can be found in section 16.
7.5 Legal Disclaimer
IN NO EVENT SHALL MOTOROLA, INC. BE LIABLE FOR ANY INJURY TO ANY PERSONS
OR ANY DAMAGE CAUSED DURING THE INSTALLATION OF THE MOTOROLA PTP 400
SERIES PRODUCT.
7.6 Mounting the ODU
s
The ODU mounting bracket is designed to ease installation by fixing the bracket to the pole
and then bringing the ODU into position using a single bolt fixing. The ODU should be
mounted using the following steps ensuring that the cable entry is at the bottom:
The ODU mounting bracket is designed to work with poles with diameters in the range 50mm
(2”) to 75mm (3”).
Step 1: Mount the bracket to the pole. Step 2: Mate the unit to the bracket and
tighten the nut and bolt.
Pole diameters of 25mm (1”) to 50mm (2”) can be accommodated by inverting the back of the
bracket as shown in Figure 16.