Marantz DLP PROJECTOR VP-12S2 - Manual (Page 14)

10
ENGLISH
1. Connect the supplied AC power cord. (
☞
P.8)
2. Press the POWER ON key on the remote controller or the POWER key on the projector.
The POWER ON indicator lights up.
Project an image on the screen roughly at first.
1. Turn the Zoom ring and adjust to the desired size within
the zoom range.
2. Turn the Focus ring until the image on the screen
becomes clear.
You can adjust the image position with the Lens Shift knob.
❖
Turn the Lens Shift knob to clockwise : The image goes up.
Adjusting the Image Position
1. 2.
Zooming and Focusing
Turning on the Power
Up
Clockwise
INITIAL SETTING