Marantz DLP PROJECTOR VP-12S2 - Manual (Page 26)

22
ENGLISH
❖
Sub Control
Contrast Red
: This menu allows the users to set the contrast for red.
Contrast Green
: This menu allows the users to set the contrast for green.
Contrast Blue
: This menu allows the users to set the contrast for blue.
Brightness Red
: This menu allows the users to set the brightness for red.
Brightness Green
: This menu allows the users to set the brightness for green.
Brightness Blue
: This menu allows the users to set the brightness for blue.
❖
Miscellaneous
DCDi
: This menu allows the users to control DCDi.
FRC (Frame Rate Conversion)
Auto : Frame Rate Conversion function is basically off. However FRC turns on automatically depending on vertical
frequency of input signal.
ON : Frame Rate Conversion function is “ON”. (60Hz fixed)
CCS (Cross Color Suppressor Function)
ON : Cross color suppressor enabled.
OFF : Cross color suppressor disabled. For like progressive scan DVD players, where most of the source material does
not contain any cross color, use this mode.
VCR Mode
ON : A projector is forced into the intra-field only deinterlacing mode.
OFF : A projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion
adaptive video deinterlacing and full frame film source deinterlacing using 3:2 pulldown detection (2:2 pulldown
for 625/50 sources).
Luminance
Chrominance
Sub Control
Miscellaneous
DCDi
FRC
CCS
VCR Mode
On
Auto
Off
Off
Luminance
Chrominance
Sub Control
Miscellaneous Contrast Red
Contrast Green
Contrast Blue
Brightness Red
Brightness Green
Brightness Blue 128
128
128
128
128
128
Item
Contrast Red
Contrast Green
Contrast Blue
Brightness Red
Brightness Green
Brightness Blue
Adjustments
0 255
0 255
0 255
0 255
0 255
0 255
Item
DCDi
FRC
CCS
VCR Mode
Adjustments
On Off
Auto On
On Off
On Off