Marantz DLP PROJECTOR VP-12S2 User Manual
Page 32
28
ENGLISH
– When the lamp life becomes less than 100 hours and the unit is still on, the remaining lamp life is displayed on the screen
automatically.
– When the lamp life becomes less than 5 hours, the remaining lamp life is displayed on the screen .
To clear the warning, press the
MENU
key.
– When the lamp life has expired (Lamp Life 0 HOURS), the unit will be immediately turned off, and the WARNING indicator will
light up in red.
❖
Initialize the Lamp Life
If the lamp is replaced to new one, follow this procedure to reset (initialize) the lamp life.
Refer to "Replacing Lamp Unit". (
☞
P.29)
1.
Connect the AC power cord after replacing lamp unit. (
☞
P.8)
2.
Press the
POWER ON
key on the remote controller or the
POWER
key on the projector.
The following message appears for 120 seconds.
3.
Select “Yes”, using the
1 / 2
keys.
4.
Press the
ENTER
key . The lamp life indicator is now initialized.
2.
3.
4.
3.
2.
4.
Yes
No
New Lamp ?
Lamp Life 0 Hours
Warning
Lamp Life 5 Hours
Warning
Warning
Lamp Life 100 Hours