Marantz DLP PROJECTOR VP-12S2 - Manual (Page 28)

24
ENGLISH
The following adjustments can be made:
– Keystone H, V
Adjust trapezoid image to rectangle image.
– Auto Adjust
Yes : For RGB IN signal, Picture Shift V and H, Size V and H, and Phase are adjusted automatically.
No : If something wrong with AUTO Adjust, select No, and adjust Size V, Size H, Picture Shift H, Picture Shift V, and/or Phase
manually.
Use
1 / 2
key to select “Yes”, and press the ENTER key.
– Picture Shift V, H
Adjust the position of the picture. H adjusts the horizontal position of the picture. V adjusts the vertical position of the picture.
– Size V, H
Adjust the vertical and horizontal size of the picture.
– Phase
Adjust the phase of the DMD TM dots and the computer signal input from the RGB IN. Adjust the picture to where it looks
clearest.
NOTE:
- If User Memory is set to default, Picture Shift V, H cannot be selected. To select Picture Shift V, H, set User Memory to either 1 to 3.
See “Memory”. (
☞
P.27)
❖
Setting the Display Menu
1. Use
1 / 2
key to adjust.
2. Use
3
key to go back to the menu item.
2.
1.
2.
1.
Keystone-V (Electronic vertical
keystone correction)
Keystone-H (Electronic horizontal
keystone correction)
Auto Adjust
Picture Shift V
Size V
Picture Shift H
Size H
Phase
Item Adjustments
Down
Small
Left
Small
Backward
Up
Large
Right
Large
Forward
Yes / No
Picture Adjust
Setting
Display
Config
Trigger 2
Memory Keystone V
Keystone H
Auto Adjust
Picture Shift V
Size V
Picture Shift V
Size H
Phase 0
0
50
50
50
50
12
Display