Monarch Instrument 9402 - Manual (Page 22)

3. Press
1
or
2
until you see the option you want. Then
press 6 . You will see
SUPPLY
< Separators >
4. Press 8 twice to exit to the Main menu and save your
changes.
NOTE: The printer will not save your changes if you turn
it Off before returning to the Main menu.
Feed Mode
You can print supplies one at a time ( on demand) or in one
strip ( continuous). If you select on demand, the printer prints
and dispenses one label each time you press
6
.
To change the setting, follow steps 1 through 3 at the
beginning of this chapter. Then follow the steps below.
1. Press 2 until you see
SUPPLY
< Feed Mode >
2. Press
6
. The previous setting appears, for example
FEED MODE
Continuous >
3. Press
1
or
2
until you see the option you want. Then
press 6 . You will see
SUPPLY
< Feed Mode >
9401/9402 Operator’s Handbook
3-4