Monarch Instrument 9402 - Manual (Page 36)

4. Press
8
three times to return to the Main menu and
save your changes
NOTE: The printer will not save your changes if you turn
it Off before returning to the Main menu.
Reset to Defaults
To reset the communication values to the defaults, follow steps
1 through 5 at the beginning of this chapter. Then follow the
steps below.
1. Press 2 until you see
USER COMM
< Reset
2. Press
6
. You will see
Are you sure?
No >
The Reset options are
No
Yes
3. You can
•
press 6 to exit without changing the values. You
will return to the User Comm menu.
•
press
2
then
6
to set the values to the defaults.
You will see
USER COMM
< Reset
9401/9402 Operator’s Handbook
4-8