Monarch Instrument 9402 - Manual (Page 24)

To change the setting, follow steps 1 through 3 at the
beginning of this chapter. Then follow the steps below.
1. Press 2 until you see
SUPPLY
< Print Pos >
2. Press
6
. The previous setting appears, for example
Enter print pos
[+/-999]: +0
3. Press
9
to reset the print position to 0, or use the arrow
keys to change the print position. Pressing 2 increases
the value (moves the image up); 1 decreases it (moves
the image down).
•
Press the arrow key once to change by one number at
a time.
•
Press and hold the arrow key to change rapidly.
4. Press
6
when the number you want is displayed. You
will see
SUPPLY
< Print Pos >
5. Press 8 twice to exit to the Main menu and save your
changes.
NOTE: The printer will not save your changes if you turn
it Off before returning to the Main menu.
9401/9402 Operator’s Handbook
3-6