Monarch Instrument 9402 - Manual (Page 48)

Re-Image All
You use the Re-Image All feature in two situations: when you
use overlapping fields on a format and when you change
settings on the printer.
Overlapping Fields
Sometimes, you may use overlapping fields on your format.
For example, a marked-down price is often denoted by a
number with a line though it. In this case, the line and the
price fields overlap.
If you set Re-Image All to... The printer redraws...
Yes All fields with each new batch.
No Only fields that have changed
since the last batch, which
saves processing time.
New Settings
While using your 9401 printer, you may change any of the
following position settings:
•
Supply position
•
Margin position
•
Print position setting.
Make sure Re-Image All’s setting is Yes. This setting ensures
that the new settings will take effect on later batches.
9401/9402 Operator’s Handbook
6-8