Monarch Instrument 9402 - Manual (Page 26)

3. Press
9
to reset the supply position to 0, or use the
arrow keys to change the print position. Pressing 2
increases the value (feeds more supply); 1 decreases it
(feeds less supply).
•
Press the arrow key once to change by one number at
a time.
•
Press and hold the arrow key to change rapidly.
4. Press
6
when the number you want is displayed. You
will see
SUPPLY
< Supply Pos >
5. Press
8
twice to exit to the Main menu and save your
changes.
NOTE: The printer will not save your changes if you turn
it Off before returning to the Main menu.
Margin Position
This function adjusts the horizontal print position on the supply.
The adjustments are in dots (0.0052 inch). The range is from
-99 to +99 (0.52 inches), and the default is 0.
Print too far to the left Print too far to the right
9401/9402 Operator’s Handbook
3-8