Manitowoc Ice Q130 - Manual (Page 16)

Installation Instructions Section 2
2-8 Part Number 000001130 12/08
Installation Checklist
Is the ice machine level?
Has all of the internal packing been removed?
Have all of the electrical and water connections
been made?
Has the supply voltage been tested and
checked against the rating on the nameplate?
Is there proper clearance around the ice
machine for air circulation?
Is the ice machine grounded and polarity
correct?
Has the ice machine been installed where
ambient temperatures will remain in the range
of 40° – 110°F (4.4° – 43.3°C)?
Has the ice machine been installed where the
incoming water temperature will remain in the
range of 40° – 90°F (4.4° – 32.2°C)?
Is there a separate drain for the water-cooled
condenser?
Is there a separate drain for the bin?
Are the ice machine and bin drains vented?
Are all electrical leads free from contact with
refrigeration lines and moving equipment?
Has the owner/operator been instructed
regarding maintenance and the use of
Manitowoc Cleaner and Sanitizer?
Has the owner/operator completed the warranty
registration card?
Has the ice machine and bin been sanitized?
Is the toggle switch set to ice? (The toggle
switch is located directly behind the front panel).
Is the ice thickness control set correctly? (Refer
to Operational Checks to check/set the correct
ice bridge thickness).
Is the float valve in the OPEN position?