Manitowoc Ice Q130 - Manual (Page 25)

Section 4 Maintenance
Part Number 000001130 12/08 4-3
Q130 Models
Q130 Water Distribution Tube Removal
• Loosen the two thumbscrews, which secure the
distribution tube.
• Lift the distribution tube up off the thumbscrews.
Disassembly
• Twist the barbed end until the tab lines up with the
keyway.
• Pull the inner tube end outward.
Q130 Water Distribution Tube Disassembly
E. Remove the Float Valve
• Turn the splash shield counterclockwise one or two
turns.
Float Valve Removal
• Pull the float valve forward and off the mounting
bracket.
• Disconnect the water inlet tube from the float valve at
the compression fitting.
• Remove the cap and filter screen for cleaning.
THUMBSCREW
REMOVE ICE
THICKNESS PROBE
THUMBSCREW
DISTRIBUTION
TUBE
TAB
KEYWAY
FLOAT VALVE
BRACKET
COMPRESSION
FITTING
CAP AND
FILTER SCREEN
SHUT-OFF VALVE
SPLASH SHIELD
FLOAT