Manitowoc Ice Q130 - Manual (Page 26)

Maintenance Section 4
4-4 Part Number 000001130 12/08
F. Remove the Water Trough
• Apply downward pressure on the siphon tube and
remove from the bottom of the water trough.
• Remove the upper thumbscrew.
• While supporting the water trough remove the two
thumbscrews from beneath the water trough.
• Remove the water trough from the bin area.
G. Remove the ice damper.
Q130
• Grasp left side of ice damper and apply pressure
against the right-hand ice damper mounting bracket.
• Pull forward on the ice damper until the left-hand
mounting pin disengages.
Installation
• Grasp the right side of ice damper and place left
hand pin in the mounting bracket.
• While applying pressure against the left-hand
mounting bracket push the damper until the right-
hand mounting pin engages.
Q210/Q270
• Grasp ice damper and apply pressure toward the left
hand mounting bracket.
• Apply pressure to the right hand mounting bracket
with thumb.
• Pull ice damper forward when the right hand ice
damper pin disengages.
Installation
• Place ice damper pin in left hand mounting bracket
and apply pressure toward the left hand mounting
bracket.
• Apply pressure to the right hand mounting bracket
with thumb.
• Push ice damper toward evaporator until right hand
damper pin engages.
REMOVE
SIPHON TUBE
UPPER
THUMBSCREW
LOWER
THUMBSCREWS