Multi-Tech Systems MVP120 - Manual (Page 20)

20
Chapter 3 - Installing the MVP120 Software
Multi-Tech Systems, Inc. MultiVOIP User Guide
Chapter 3 - Installing the MVP120 Software
The section covers the software installation. Note that not every screen or option in the
process is included in this chapter. Additional information on the MVP120 software is
provided in Chapter 4 and Chapter 5 and in the online Help.
Note: The phonebook directory configuration process is different depending on whether or
not you have an enabled H.323 Gatekeeper resident in your network. The section on
“Configuring Your MVP120” will explain these differences.
The MVP120 software and User Guide are contained on the MVP120 CD. The CD is auto-
detectable, so when you insert it into your CD ROM drive it will start up automatically. When
you have finished configuring your MVP120, you can view and print the User Guide by
clicking on the Install Manuals icon.
CAUTION: If you are installing a MVP120 behind a Firewall, the Firewall must support H.323.
Refer to your Firewall user documentation to enable H.323 support.
1. Make certain that your MVP120 has been properly cabled and that it is powered on.
2. Insert the MVP120 CD into a CD-ROM drive. The CD is auto-detectable, so it starts
automatically. It may take 10 to 20 seconds for the Multi-Tech Installation CD window
to appear.
If the Multi-Tech Installation CD window does not appear automatically, click My
Computer, then right-click the CD-ROM drive icon, click Open, then click the
Autorun icon.
3. When the Multi-Tech Installation CD window displays, click the Install Software icon.
You will be prompted to select your software:
H.323 or Proprietary. Select Proprietary.
4. The Welcome/Setup dialog box displays.