Multi-Tech Systems MVP120 - Manual (Page 7)

7
Chapter 1 - Introduction to the MultiVOIP
Multi-Tech Systems, Inc. MultiVOIP User Guide
Preview of This Guide
This guide describes the MultiVOIP and tells you how to make the cable connections, install
the software, and configure it. The information contained in each chapter is as follows:
Chapter 1 - Introduction to the MultiVOIP
This chapter describes the MultiVOIP features, a typical application, and the front and back
panels.
Chapter 2 - Installation
This chapter provides an overview of the installation process, describes the contents of the
MultiVOIP package, diagrams the cabling instructions, and lists Telecom safety warnings.
Chapter 3 - Installing the MVP120 Software
This chapter describes how to load the MultiVOIP software.
Chapter 4 - Configuring the Master MultiVOIP
This chapter describes how to configure your Master.
Chapter 5- Configuring the Slave MultiVOIPs
This chapter describes how to configure your Slave.
Chapter 6 - Deploying the VOIP Network.
Chapter 7 - Using the MultiVOIP Software.
This chapter describes how to use the software to make changes and to the configuration of
your MultiVOIP.
Chapter 8 - Remote Configuration and Management
This chapter describes how to change the configuration of a remote MultiVOIP. The chapter
also describes typical client applications, such as Telnet and Web-based management.
Chapter 9 - Warranty, Service, and Technical Support
This chapter provides a statement of limited warranty, tells you how to get service for your
MultiVOIP, and gives you information about the Multi Tech Systems, Inc. Web site.