Multi-Tech Systems MVP120 User Manual

Page 90

Advertising
background image

90

Glossary

Multi-Tech Systems, Inc. MultiVOIP User Guide

Backward Explicit Congestion Notification (BECN): A bit that tells you that a certain frame on a particular logical connection
has encountered heavy traffic. The bit provides notification that congestion-avoidance procedures should be initiated in the opposite
direction of the received frame. See also FECN (Forward Explicit Congestion Notification).

Basic Rate Interface (BRI): An ISDN access interface type comprised of two B-channels each at 64K bps and one D-channel at
64K bps (2B+D).

Bell Operating Companies (BOC): The family of corporations created during the divestiture of AT&T. BOCs are independent
companies which service a specific region of the US. Also called Regional Bell Operating Companies (RBOCs).

Bell Pub 41450: The Bell publication defining requirements for data format conversion, line conditioning, and termination for direct
DDS connection.

Bell Pub 62310: The Bell publication defining requirements for data format conversion, line conditioning, and termination for direct
DDS connection.

Binary Synchronous Communication (BSC): A form of telecommunication line control that uses a standard set of transmission
control characters and control character sequences, for binary synchronous transmission of binary-coded data between stations.

Bit (Binary digIT): A bit is the basis of the binary number system. It can take the value of 1 or 0. Bits are generally recognized as
the electrical charge generated or stored by a computer that represent some portion of usable information.

Bit Error Rate Test (BERT): A device or routine that measures the quality of data transmission. A known bit pattern is transmitted,
and the errors received are counted and a BER (bit error rate) is calculated. The BER is the ratio of received bits in error relative to
the total number of bits received, expressed in a power of 10.

Bit robbing: The use of the least significant bit per channel in every sixth frame for signaling. The line signal bits "robbed" from
the speech pat conveys sufficient pre-ISDN telephony signaling information with the remaining line signal bits providing sufficient
line signaling bits for recreating the original sound. See "robbed bit signaling".

Blue Alarm: An error indication signal consisting of all 1s indicating disconnection or attached device failure. Contrast "Red Alarm"
and "Yellow Alarm".

Bps (bits per second): A unit to measure the speed at which data bits can be transmitted or received. Bps differs from baud when
more than one bit is represented by a single cycle of the carrier.

Bridges: 1. A functional unit that interconnects two local area networks that use the same logical link protocol but may use
different medium access control protocols. 2. A functional unit that interconnects multiple LANs (locally or remotely) that use the
same logical link control protocol but that can use different medium access control protocols. A bridge forwards a frame to another
bridge based on the medium access control (MAC) address. 3. In the connection of local loops, channels, or rings, the equipment
and techniques used to match circuits and to facilitate accurate data transmission.

Buffer: A temporary storage register or Random Access Memory (RAM) used in all aspects of data communications which
prevents data from being lost due to differences in transmission speed. Keyboards, serial ports, muxes and printers are a few
examples of the devices that contain buffers.

Bus: A common channel between hardware devices either internally between components in a computer, or externally between
stations in a communications network.

Byte: The unit of information a computer can handle at one time. The most common understanding is that a byte consists of 8
binary digits (bits), because that's what computers can handle. A byte holds the equivalent of a single character (such as the letter
A).

C

Call Setup Time: The time to establish a circuit-switched call between two points. Includes dialing, wait time, and CO/long
distance service movement time.

Carrier Group Alarm (CGA): A T1 service alarm generated by a channel bank when an OOF condition occurs for a predefined
length of time (usually 300mS to 2.5 seconds). The CGA causes the calls using a trunk to be dropped and for trunk conditioning to
be applied.

Carrier signal: An analog signal with known frequency, amplitude and phase characteristics used as a transport facility for useful
information. By knowing the original characteristics, a receiver can interpret any changes as modulations, and thereby recover the
information.

CCITT (Consultative Committee for International Telephone and Telegraph): An advisory committee created and controlled by
the United Nations and headquartered in Geneva whose purpose is to develop and to publish recommendations for worldwide
standardization of telecommunications devices. CCITT has developed modem standards that are adapted primarily by PTT (post,
telephone and telegraph) organizations that operate telephone networks of countries outside of the U.S. See also ITU.

Central Office (CO): The lowest, or most basic level of switching in the PSTN (public switched telephone network). A business
PABX or any residential phone connects to the PSTN at a central office.

Advertising