Multi-Tech Systems MVP120 - Manual (Page 32)

Multi-Tech Systems, Inc. MultiVOIP User Guide
Chapter 4 - Configuring the Master MultiVOIP
32
29. Enter a unique phone number for the local VOIP in the Phone Number box and enter 1 for
the Voice/Fax channel in the Voice Channel box. This number must be 1 for each MVP120.
Note: MVP120 and MVP110 will only have one entry and will be Channel 1.
30. The Description box is optional, but can be useful in associating the channel to the
extension. If you wish, enter a description of your local phone number. This description
serves to identify the phone number you entered in the previous step. Normally the “Master”
MVP120 resides at the entity’s main office; therefore, for this example you could enter a
description such as “New York Office”).
31. The Station Identification group includes a Hunt Group list. This list enables you to
indicate which Hunt Group you want the phone number to be associated with; or, you can
select NO HUNT if you don’t want this entry to participate in hunting. Hunting is a series of
telephone lines organized in such a way that if the first line is busy the next line is hunted and
so on until a free line is found. For this example, assign the phone entry to HUNT GROUP
#1.
Once you have assigned this entry to a Hunt Group (or NO HUNT), you must enter the IP
Address of the Master MVP120 in the IP Address box.
Note: The Port box becomes active as you begin to enter the IP Address. The entry is the
H.323 industry standard Port value (1720) used to communicate with other H.323 endpoints.
32. Click OK to return to the Phone Directory Database dialog box. It now includes phone
number, destination details, and description.