Multi-Tech Systems MVP120 - Manual (Page 47)

47
Chapter 7 - Using the MultiVOIP Software
Multi-Tech Systems, Inc. MultiVOIP User Guide
MVP120 Configuration
The MVP120 Setup menu consists of 10 buttons, an Events window in the middle of the
menu, and a status bar at the bottom of the menu. The 10 buttons allow you to display and
change the voice channels and IP protocol parameters, display and manage the Phone Book
listing, view statistics and call progress, and change features such as SNMP Agent, Telnet
Server, WEB Server, and assign a MVP120 password.
The Events window in the lower third of the Setup menu provides information about the boot
process.
The status bar at the bottom of the Setup menu displays the current status of the unit and
shows, for example, if it is Running, the most recent date the unit was configured, the type of
connection you have to the unit, and your rights. It shows if your PC is connected directly to
the command port of the MVP120 or is communicating with the Ethernet port. The Rights
box which displays whether you have Read/Write or Read-Only rights. The first user to
communicate with the MVP120 command port has Read/Write rights that enable the user to
view and/or change the configuration of the MVP120. Any additional simultaneous users
have Read-Only rights and can only display the configuration of the MVP120 but are
prohibited from changing the configuration.