Motorola 3460 - Manual (Page 139)

3460 Fast’R
B-29
+FCLASS=? Service Class.
Tests the modem’s Service Class.
0 Data modem
1 Service Class 1 fax modem
2.0 Service Class 2.0 fax modem
+FCLASS=n Service Class.
Specifies the modem’s Service Class.
0 Data modem
1 Service Class 1 fax modem
2.0 Service Class 2.0 fax modem
+FCR=n Receive Fax Data.
Specifies whether the computer can receive fax data.
0 No
1 Yes
+FLO=n Fax Flow Control
Specifies the computer/modem flow control.
The *FL command also controls this value.
0 None
1 XON/XOFF in either direction
2 RTS/CTS
+FMI? Manufacturer ID
Requests manufacturer ID from the modem when it is
operating in Fax Class 1 mode (+FCLASS=1).
The modem responds as follows:
Motorola
+FMM? Modem ID
Requests modem ID from the modem when it is
operating in Fax Class 1 mode (+FCLASS=1).
The modem responds as follows:
3460
AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.