Motorola 3460 User Manual
Page 34
3460 Fast’R
1-20
Modem Addresses in Multiple-Enclosure
Configurations
When you cable enclosures together, their modem slots are assigned the
following addresses. Slot numbers and modem locations are marked on
the enclosure rear panel. Set each enclosure to a different address.
With Fast’RVu, select a modem in an AccessWay enclosure as follows.
1. In the Fast’RVu main window, select ENCLOSURE LOCATION.
2. In an option window, specify the modem location. Example: Select
Enclosure (Nest) with DIPS at ON/ON; Slot 1; Position A; which is
Modem Address 1:
Table 1-3. Modem Addresses in AccessWay Enclosure
The Enclosure
With This DIP
Setting
Has These
Modem-
Addresses...
Assigned to These
Locations:
DIPs =ON/ON
1 through 32
1 = Slot 1 Position A
2 = Slot 1 Position B
3 = Slot 2 Position A
4 = Slot 2 Position B
. . .
32 = Slot 16 Position B
DIPs =ON/OFF
33 through 64
33 = Slot 1 Position A
. . .
64 = Slot 16 Position B
DIPs =OFF/ON
65 through 96
65 = Slot 1 Position A
. . .
96 = Slot 16 Position B
DIPs =OFF/OFF
97 through 128
97 = Slot 1 Position A
. . .
128 = Slot 16 Position B
A single-modem card supports a two- or four-wire leased-line connection in
Position A, or a dial-line connection in Position B.