Motorola 3460 - Manual (Page 75)

3460 Fast’R
3-23
Dial to Lease
Threshold AT * LE3=1 hour The originating modem uses the
LE option to determine when to
disconnect from a dial line and
return to leased-line operation.
Restoral
Initiation/
Termination AT * RE4=FP/Auto The originating modem
determines when to initiate
restoral.
The answer modem cannot
automatically initiate restoral; it
can only answer an inbound call,
thus ensuring that both modems
do not try to call each other at the
same time (which would result in
a failed restoral attempt).
Restoral Auto-
Redial AT * RR0=Disable The RR option determines
whether the originating modem
can automatically redial, while in
restoral, upon call failure or
carrier loss. Disable prevents it
from redialing.
Test Restoral
Country-specific
AT * TR0=Off The TR option specifies how
often the modem checks for loop
current on the dial line, to
determine whether the line is
available. Off disables testing.
Parameter Option Comment
Parameters and options shown shaded gray vary by country. For details, refer
to Appendix B of the 3460 Fast’R Reference Guide.