Miller Electric MILLERMATIC 350P - Manual (Page 19)

.
A complete Parts List is available at www.MillerWelds.com
OM-1327 Page 15
3-8. Connecting Spoolmatic) 15A Or 30A Gun
803 568-D
1 Gun Trigger Plug
Insert plug into receptacle, and
tighten threaded collar.
2
Weld Cable
3 Shielding Gas Hose
Route weld cable and gas hose
through opening in front panel.
4
Positive Weld Output Terminal
Connect weld cable to weld output
terminal.
5
Regulator/Flowmeter
Route shielding gas hose through
wire drive compartment, out
opening in rear panel, and up to
regulator/flowmeter. Connect gas
hose to regulator/flowmeter.
Tools Needed:
3/4, 5/8 in.
О
О
1
2
3
4
2
5
3