Miller Electric Big Blue 402D - Manual (Page 61)

OM-495 Page 55 Return To Table Of Contents
Every 500 h
Change Oil Filter.
See Section 10-7.
Service more often
in dirty conditions.
Change Oil. See
Section 10-7.
Repair Or
Replace
Cracked
Cables.
Check
Valve
Clearance.*
Every 1000 h
Service Welding
Generator Brushes
And Slip Rings.
Service More Often
In Dirty Conditions.*
Change Fuel
Filters. See
Section 10-7.
Drain Sludge
From Fuel
Tank. See
Section
10-7.
Blow Out Or
Vacuum Inside.
During Heavy
Service,
Clean Monthly.
OR
FUEL
SLUDGE
Every 3000 h
Clean/Set
Injectors.*
Notes