Multi-Tech Systems CF220 - Manual (Page 40)

Chapter 4: CallFinder Software Screens
Multi-Tech Systems, Inc. CF220 CallFinder User Guide 40
Administration Screen Field Definitions
Field Name Values Description
SMTP Configuration Fields
SMTP Server Address n.n.n.n
for n = 0-255 Domain name or IP address for mail server
(SMTP must be supported on mail server).
Server User ID alphanumeric Identifier used by CallFinder when interfacing
with mail server. CallFinder uses mail server to
send call reports to administrator. Some email
servers require authentication when accessed for
this purpose. To satisfy this authentication
requirement (where needed), a User ID must be
specified for the CallFinder unit. Leave this field
blank if authentication is not needed.
Administrator Email alphanumeric Email address to which call log reports will be
sent. An email is also sent to the administrator
each time the CallFinder is powered up and
when mail configuration settings are updated.
Password alphanumeric Password used by CallFinder server unit when
accessing mail server. Leave this field blank if
authentication is not needed.
Retype Password alphanumeric Reiteration of above password.
Update (button) Click on this button to make changes to SMTP
Configuration take effect. Updating triggers the
sending of an email to the administrator.
Time Configuration Fields
Time Server URL Location of time-tracking computer that supports
SNTP. This server is the functional substitute for
a real-time clock in the CallFinder unit. Clock
sources can be found on the Internet. In the
absence of an Internet connection, a time source
within the CallFinder network must be
established. The clock is used for call logging.
Add Time Server
URL Used to add a user-supplied time server.
Time Zone
alphanumeric Indicates the time zone in which the CallFinder
unit is located.