Monarch Instrument 9400 Series - Manual (Page 101)

8. Type a number from 1-127 for XOFF flow control, or 128
for DTR flow control and press E .
NOTES:
•
If you select DTR control (128) as the XON character,
you must also select DTR as the XOFF character. If
you do not select DTR as the XOFF character, XON
changes back to the default character (17).
•
The Start and Stop characters must be set for DTR flow
control for IBM PC equipment.
You’ll see the Configuration Options menu.
Press
!
to exit to the main menu.
Adjusting the Print Contrast
You can adjust the print contrast to darken or lighten printing.
You can also print a test tag to check the adjustments you
make. The adjustment range is from -99 (lighter) to +20
(darker).
NOTE: The normal print contrast setting (+00) prints
accurate bar codes on most tag or label stock. If
you change the print contrast, use a bar code
verifier to be sure your bar codes scan correctly.
1. From the main menu, press
U
or
D
to display Data
Entry.
Press
E . You’ll see
Data Entry Mode
↓
Select Format: NAME __
2. Press
#
. You’ll see
Enter password:_ _ _ _ _ _ _ _
C
onf
igur
ing t
h
e
P
rin
te
r
5. Configuring the Printer
5-15