Monarch Instrument 9400 Series - Manual (Page 18)

The pivot point for the field is
the horizontal/vertical location
you choose in Format Entry.
It is possible to rotate the field
completely or partially off the
supply. Make sure you allow
for the rotation you select
when you choose the field
location. The field and
character rotation examples
later in this section show how
a field moves when it is
rotated.
Rotating Characters Within a Field
There are two directions you can print a character within a field:
TOP The top of the character points to the top of
the field.
LEFT The top of the character points to the left
side of the field.
Notice that the characters shift. The pivot point is shown for
each rotation.
In the examples the field uses TOP rotation as discussed in
"Rotating a Field." You specify both field and character
rotation in Format Entry mode. The field and character
rotation examples later in this section show how a character
moves when it is rotated.
Left Top
9400 Series User’s Manual
2-4