Monarch Instrument 9400 Series - Manual (Page 111)

6. Prompts Reference
This section describes each of the design elements used in
format entry. Each discussion includes the Format Entry
prompt, and the selectable values. This section is in
alphabetical order by prompt or field contents.
Bar Code Type
Format Entry Prompt:
Select barcode:
↓
UPCA __
Values: UPC-A (Standard, +2, or +5)
UPC-E (Standard, +2, or +5)
Interleaved 2 of 5
Code 39
NW7
EAN-8 (Standard, +2, or +5)
EAN-13 (Standard, +2, or +5)
CODE128
MSI
For the density of the bars and bar height, see "Bar Code
Density" and "Bar Code Height" later in this section.
All bar codes require a white space called the quiet zone for
successful scanning. The minimum quiet zone is .10 inches
from the left and right edges of the supply to the printed bars.
See "Field Location" later in this section for more information.
To set human readable characters for UPC and EAN type bar
codes, see "Bar Code - Human Readable Characters."
P
rom
p
ts
R
e
fe
re
nc
e
6-1