Monarch Instrument 9400 Series - Manual (Page 17)

Identifying the Top of Supply
The top of the supply is the cut edge (the side that exits the
printer last). The bottom of the supply is the leading edge (the
side that exits the print first). The figure below shows the top
edge and the bottom edge of the supply.
Rotating a Field
There are four directions you can print a field on the supply:
TOP The top of the field points to the top edge of
the supply.
LEFT The top of the field points to the left edge of
the supply.
BOTTOM The top of the field points to the bottom
edge of the supply.
RIGHT The top of the field points to the right edge
of the supply.
Top
Bottom
Desi
g
n
in
g
a
F
o
rmat
2. Designing a Format
2-3