Component testing information, Warning, Field selectable options – Maytag AOES3030 User Manual

Page 12

Advertising
background image

Component Testing Information

!

WARNING

To avoid risk of electrical shook, personal injury or death: disconnect power to oven before servicing, unless
testing requires it.

16021875 Rev. 0

©2003 Maytag Appliances Company

12

Illustration Component

Test

Procedure

Results

ERC4800 Controlled

Child lock out

This is a safety feature that can be
used to prevent children from
accidentally programming the oven. It
disables the electronic oven control.
Press and hold Bake and Cook Time
for 10 seconds. “OFF” will display
where the temperature normally
appears.

To reactivate the control, press and
hold Bake and Cook Time for 10
seconds. Child lockout features must
be reset after a power failure.

E17

E16

E11

E10

E13

E12

E18

E3

E2

E14

E15

E6

E7

E8

E9

E4

E5

E19

K10

K11

K4

K2

K5

K6

K3

K1

Oven
Light

Panel
Light

Bake

Broil

Conv.
Element

Door
Lock

Conv.
Fan

Double
Line Brk

E1

Relay board

Listen for relay to actuate.
Verify input and output power.

If relay does not actuate, verify power to
relay.

ERC/Adapter board
assembly

F1 - Control malfuction.

Replace ERC.

Field Selectable Options

Standard: The standard setup is 8. This is a 12 hour type of clock, 60 Hz line frequency and an oven with a

convection fan.

Clock Time Format

12 or 24 hour format

The time of day and the stop time can be displayed in either a 12 or 24 hour format. The control will come in a 12
hour format and can be changed to a 24 hour format from the front control panel.
Clock Time Base

60 or 50 Hz input line frequency

This is a time reference for the clock, timer, and internal timing of the control. The control will select the frequency
automatically when the control is powered up.
Selecting Options
In order to select the field selectable options, Press and hold the CLOCK pad on power up of the control. To change
the options press one of the slew pads until the desired option appears and in approximately 9 seconds the control
will change to the normal operation or once selected press the CANCEL pad. The right time digit will indicate the
current options selected as listed in the table below. (Standard setting is 8.)

Code Number

24 Hour Clock

50 Hz

No Convection Fan

8

9 X

H

X

r X X

o

X

d X

X

X X

Blank X X

X

X = indicates Selected

= indicates Not Selected

Advertising
This manual is related to the following products: