Maytag AOES3030 - Manual (Page 33)

©2003 Maytag Appliances Company 16021875 Rev. 0 B—5
1. Center food on broiling grid and pan, place in oven.
• Oven door must be closed while broiling.
2. Press BROIL pad.
• “BROIL”, and “---” displays.
3. Press
+
or - until desired setting is displayed. Broil
can be set from 170°F to HI.
• Oven will begin to broil automatically. "ON",
"BROIL", and the selected setting will be
displayed.
4. When finished press OVEN CANCEL pad.
Self-Cleaning
WARNING
!
To avoid risk of fire, clean excess spills from oven
interior.
• A small amount of smoke is normal when cleaning.
Excessive smoke may indicate too much food residue
has been left in oven or a faulty gasket.
• Clean oven before it gets too dirty. Wipe up large spills
before self-cleaning.
• Do not use cleaning cycle if oven light cover is not
properly in place.
• Oven light will not work during clean cycle.
1. Remove oven racks and all cooking utensils from
oven. Clean excess spills from oven interior.
2. Press CLEAN pad.
3. Press
+
or -
pad until desired cleaning time is
displayed. Clean can be set from 2 to 4 hours.
Recommended clean time is 3 hours.
• Oven will begin to clean automatically. "CLEAN",
"LOCK", and "ON" will light in display. As oven
door locks and unlocks "LOCK" will flash in
display. When door is locked, "LOCK" will remain
in display. When cleaning cycle has elapsed, oven
will automatically turn off. End-of-cycle signal will
not sound.
CAUTION
!
To avoid risk of personal injury, do not touch oven vents
or areas around vents during self-cleaning. These areas
can become hot enough to cause burns.
To avoid risk of damage to automatic locking system,
do not try to force oven door open when "LOCK" is
flashing in display.
• When oven has cooled to a safe temperature,
"LOCK" will disappear from display and door can be
opened. "LOCK" will flash in display while unlocking.
Interrupt Self-Cleaning Cycle
1. Press OVEN CANCEL pad.
2. When oven has cooled to a safe temperature, door
will unlock and can be opened.
Delayed Self-Cleaning
1. Remove oven racks and all cooking utensils from
oven. Clean excess spills from oven interior.
2. Press CLEAN pad.
3. Press
+
or - until desired cleaning time is
displayed.
4. Press STOP TIME pad.
5. Press
+ or - until desired stopping time is
displayed. A starting time will automatically be
calculated based on amount of cleaning time and
stop time.
• "DELAY", "CLEAN", and "LOCK" will light in
display. As oven door locks and unlocks "LOCK"
will flash in display. Oven will begin to clean at
preset time and "ON" will light in display. When
cycle is complete oven will automatically turn off.
CAUTION
!
To avoid risk of personal injury, do not touch oven vents
or areas around vents during self-cleaning. These areas
can become hot enough to cause burns.
To avoid risk of damage to automatic locking system,
do not try to force oven door open when "LOCK" is
flashing in display.
• When oven has cooled to safe temperature, "LOCK"
will disappear from display and door can be opened.
Interrupt Self-Cleaning Cycle
1. Press OVEN CANCEL pad.
2. When oven has cooled to a safe temperature, "LOCK"
will disappear from display and door can be opened.
Programming Instructions—ERC for AOES3030