Maytag AOES3030 - Manual (Page 27)

©2003 Maytag Appliances Company 16021875 Rev. 0 A—7
AOES3030 or AOCS3040 Wall Oven Installed Side-by-Side
Wall oven junction box location indicated in grey.
A
B
C
D
E
A
B
C
D
F
Full divider
E
G
A — 1 inch minimum from bottom of countertop
B — 14 1 /
8
inches maximum from center of cutout
C — 24 inches minimum
D — 28 1 /
2
inch wall oven cutout width
E — 27 1 /
4
inch wall oven cutout height
F — 1 3 /
4
inches minimum
G — 7 /
8
inches minimum from bottom of countertop
to top of cabinet
Loosen screw
0° tilt
12° tilt
Pivot screw
Tilting Control Panel
Control panel can be adjusted to tilt from 0° to 12° to
make more visible.
1. Loosen screws on top, and sides of control panel and
pivot screw on bottom, sides of control panel before
installing oven, or while oven partially pulled from
opening.
2. Adjust control panel to desired angle and retighten
screws.
Installation Instructions