Multitech V.90/K56FLEX MT5600ZDXV - Manual (Page 14)

14
Models MT5600ZDX & ZDXV
Installation
In addition to the contents of the modem package, you will need the
following equipment.
Computer
The modem can be connected to any computer with an RS-232 serial
port. For MT5600ZDXV modems, the computer’s processor speed
should be at least 75 MHz in order to take full advantage ZDXV
telephony features.
Serial Cable
You must provide a serial cable to connect the modem to your computer.
Serial cables are available at computer stores and many office supply stores.
The cable must have a DB-25P connector at the modem end. For IBM and
compatible computers, the other end may have a DB-25P connector or a
DB-9S connector, depending on your particular computer and whether you
are using the COM1 or the COM2 serial port. The FCC requires cables to be
shielded.
DB-25 DB-9
Figure 2-1. Serial connectors at PC end