Multitech V.90/K56FLEX MT5600ZDXV - Manual (Page 49)

49
User Guide
*: Use a comma (,) to separate optional parameters. For example:
+MS=11,1,300,28800 (+MS command with the default settings). Sub-
parameters that you do not enter remain at their current value. Type a
comma only to skip a subparameter or carriage return to skip the last
subparameter. For example, +MS=,0,<Enter> disables auto mode and
keeps all other settings at their current value.
Command: -SDR=n Enable/Disable Distinctive Ring
Values: -SDR=n
Default: 0
Description: -SDR=0 Disables Distinctive Ring. Any Valid ring detect-
ed is reported as RING.
-SDR=1 Enables Distinctive Ring Type 1.
-SDR=2 Enables Distinctive Ring Type 2.
-SDR=3 Enables Distinctive Ring Type 1 and 2.
-SDR=4 Enables Distinctive Ring Type 3.
-SDR=5 Enables Distinctive Ring Type 1 and 3.
-SDR=6 Enables Distinctive Ring Type 2 and 3.
-SDR=7 Enables Distinctive Ring Type 1, 2 and 3.
The ring types supported and the corresponding ring cadence detect
definitions are as follows:
Command: )Mn Enable MNP 10 Cellular Power Level Adjustment
Values: n = 0, 1, or 2
Default: n/a
Description: )M0 n/a
)M1 n/a
)M2 n/a
*This command is included only for compatibility and performs no
function.