Multitech V.90/K56FLEX MT5600ZDXV - Manual (Page 48)

48
Models MT5600ZDX & ZDXV
Command: +MS Select Modulation
Values:
Default: n/a
Description: +MS= This extended-format command selects the modula-
tion, optionally enables or disables automode, and
optionally specifies the lowest and highest connec-
tion rates using one to four subparameters (client
modem) or five subparameters (server modem).
The command format is:
+M S=<mod>[,[<automode>][,[<min_rate>][,[<max_rate][,[<x_law]
[,[<rb_signalling>]]]]]]<cr>
The modem can send a string of information to the DTE
consisting of selected options when AT+MS?<cr> is
entered. The following table is a display of subparam-
eter definitions:
<mod> Selects Modulation Possible Rates (bps):
0 V.21 300
1 V.22 1200
2 V.22bis 2400, 1200
3 V.23 1200
9 V.32 9600, 4800
10 V.32bis 14.4k, 12k, 9.6k, 7.2k
11 V.34 33.6k, 31.2k, 28.8k, 26.4k
24k, 19.2k, 16.8k, 14.4k
12k, 9.6k, 7.2k, 4.8k, 2.4k
12 V.90 28.8k, 29.3k, 30.7k, 32k,
33.3k, 34.7k, 36k, 37.3k
38.7k, 40k, 41.3k, 42.7k,
45.3k, 46.7k, 48k, 49.3k,
50.7k, 52k, 53.3k, 54.7k,
56k
56 K56Flex 56k, 54k, 52k, 50k, 48k,
46k, 44k, 42k, 40k, 38k,
32k (downstream speeds)
64 Bell 103 300
69 Bell 212 1200
[,[<auto-mode>] Enables/disables automatic modulation
negotiation with remote modem.
0 Disables NO command equivalent.
1 Enables NO command equivalent
[,[<min-rate>] See “Possible Rates (bps)” above.
Default value is 300 bps.
[,[<max-rate>] See “Possible Rates (bps)” above.
Default value is 33600 bps.
Subparameter Definitions