Multitech V.90/K56FLEX MT5600ZDXV - Manual (Page 52)

52
Models MT5600ZDX & ZDXV
Command: #CID Caller ID
Values: n = 0, 1, or 3
Default: 0
Description: #CID=0 Disables Caller ID
#CID=1 Enables Caller ID with formatted presentation
to the DTE. The modem will present the data items
in a <TAG><Value> pair format. The expected
pairs are data, time, caller code (phone number),
and name (US models only).
#CID=2 Enables Caller ID with unformatted presentation.
The modem will present the entire packet information,
excluding the leading U's in ASCII printable hex
numbers. *#CID? Retrieves the current CID mode
from the modem (US models only).
Command: P Pulse Dial
Values: n/a
Description: Pulse dial until T (Tone Dial) Command.
Command: T Tone Dial
Values: n/a
Description: Tone dial until P (Pulse Dial) Command.
Command: +++ Escape Sequence
Values: n/a
Description: Puts the modem in command mode (and optionally
issues a command) while remaining online. Type
+++ and up to ten command characters, then press
ENTER.
Command: &Pn Make/Break Dial Ratio
Values: 0-3
Description: &P0 Make/Break dial ratio of 39/61 10 pps
&P1 n/a
&P2 n/a
&P3 n/a
Command: AT**n Download to Flash Memory
Values: 0-2
Description: AT**0 Download speed is the last sensed speed
AT**1 Download speed is 38.4K bps
AT**1 Download speed is 57.6K bps
*See Chapter 5 for Download to Flash Memory procedure.