Multitech V.90/K56FLEX MT5600ZDXV - Manual (Page 93)

93
User Guide
Compliance with BS6328 Part 1
a. The modem is not suitable for use on circuits with British Telecommunications
signaling at a normal frequency of 2280 Hz.
b. The modem does not require signaling or otherwise employ the frequency range
dc to 200 Hz.
c. The modem may be connected to a point to point two-wire or four-wire Private
Circuit.
d. The modem does not require dc from the Private Circuit for correct operation. The
modem may be damaged if connected, in a private circuit mode, to a circuit
supplying dc current (the maximum permissible direct current is zero amps).
Modem CE Mark EMC and Safety Compliance
The CE mark is affixed to the enclosed Multi-Tech product to confirm
compliance with the following European Community Directives:
Council Directive 89/336/EEC of 3 May 1989 on the approximation of the
laws of Member States relating to electromagnetic compatibility;
and
Council Directive 73/23/EEC of 19 February 1973 on the harmonization
of the laws of Member States relating to electrical equipment de-
signed for use within certain voltage limits;
and
Council Directive 98/13/EC of 12 March 1998 on the approximation of the
laws of the Member States concerning telecommunications terminal and
satellite earth station equipment.