Muratec MFX-1950 - Manual (Page 116)

6-12 u
sInG
f-
code features
Polling a document using a subaddress and password
1
Switch to the fax mode by pressing <
copy 4 fax 4 scan
>.
2
Press <Advanced Functions> until “F-Code Polling” appears on the LCD then press
<Enter>.
F-Code Polling

/  /Enter
– or –
Press the “F-Code Polling” soft key.
Enter Sub-Address
_
3
Use the numeric keys to enter the appropriate ITU-T subaddress.
Then press <Enter>.
Enter Password
_
The password setting is optional, but required if the other party has set a password on
their F-code box.
4
Use the numeric keys to enter the ITU-T password.
Then press <Enter>.
If you do not need to enter the ITU-T password, press <Enter> without entering any
number.
Enter Fax Number
_
5
Enter the fax number.
You may use a one-touch key, speed-dial number or the numeric keys to enter the fax
number.
6
Press <Start>.
Your machine dials the number and polling the document from the remote F-code
compatible machine.
To cancel the polling in progress, press <Job Confirm./Fax Cancel>, <Cancel>,
and <Cancel>.
To cancel the delayed polling, press <Job Confirm./Fax Cancel>, search the command
number you want to cancel using the cursor key, then press <Cancel>, <Cancel>. (See
also “Reviewing or canceling command,” on page 4-8.)