Muratec MFX-1950 - Manual (Page 153)

10-3 u
ser settInGs
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
u
s
e
r
s
e
t
t
In
G
s
07. Primary Mode The machine returns to the primary mode when the standby status contin-
ues for longer than 3 minutes after finishing the sending or printing jobs.
With this setting, the machine always starts up in the primary mode.
In default settings, the copy mode is set for the primary mode. However,
you can change the primary mode to the fax mode or to the scan mode.
08. Service Mode For technical support. Do NOT change this setting without an autho-
rized technician’s advice.
09. Date & Time Enter the current date and time using 24-hour format.
10. Paper Source Sets the usage rules for the paper cassettes and bypass tray.
Cassette1
You can choose one of the following for cassette 1.
Fax/Copy Used for fax printing, list printing and copying.
Not Used Cassette 1 is not used for faxing and copying.
Can be used for the separator page function
(page 5-14) or PC printing.
Fax Used only for fax printing and list printing.
Copy Used only for copying.
Cassette2 You can choose one of the following for cassette 2.
Fax/Copy Used for fax printing, list printing and copying.
Not Used Cassette 2 is not used for faxing and copying.
Can be used for the separator page function
(page 5-14) or PC printing.
Fax Used only for fax printing and list printing.
Copy Used only for copying.
Bypass tray You can choose one of the following for Bypass tray.
Fax/Copy Used for fax printing, list printing and copying.
Not Used Bypass tray is not used for faxing and copying.
Can be used for the separator page function
(page 5-14) or PC printing.
Fax Used only for fax printing and list printing.
Copy Used only for copying.
NOTE:
•The “Cassette2” appears only when the optional second cassette has been installed.
•For details of PC printing, refer to the PDF manual on the GDI Pritner/Scanner Driver
CD supplied with the machine.
11. Page Counter Displays the total number of printed and scanned page (page 8-8).