Advanced receiving functions, Advanced receiving functions -8, Switch to the fax mode by pressing – Muratec MFX-1950 User Manual

Page 98: Press <advanced functions

Advertising
background image

5-8

r

eceIvInG

faxes

Advanced receiving functions

The <Advanced Functions> key is for easy access to the following fax functions listed in

the table.

NOTE: • To shorten a frequent-use operation, assigning the function to a soft key is recom-

mended. For how to do this, see page 8-2.

• If one of the functions is assigned to any of the three soft keys, that function will

not be available through the <Advance Functions> key.

To select the fax function using advanced functions key:

1

Switch to the fax mode by pressing <

copy

4

fax

4

scan

>.

2

Press <Advanced Functions>.

3

Press <q> or <p>, or <Advanced Functions> repeatedly to select the function. Then

press <Enter>.

The table below lists the order of display. Refer to the pages indicated for detailed

information.

Advanced function

Descriptions

Reference

Broadcast

Used to make a broadcasting.

p. 4-12

Address Entry

Used to enter a recipient’s address.

Printer/Scanner

Driver Manual

Report

Prints the transmit confirmation report for only the next trans-

mission.

p. 11-5

Monitor

Obtains a dial tone to on-hook dialing.

Pause/Dial Opt.

Enters the special dialing character.

p. 3-3

Delayed

Used to make a delayed transmission.

p. 4-13

Batch Tx

Stores a document for batch transmission.

p. 4-14

Select TTI

Used to select the TTI or to disable the TTI on your transmission. p. 4-17

Cover Page

Used for the cover page setting.

p. 4-20

Fax Forward

Enables or cancels the fax forwarding.

p. 5-12

Fax & Copy

Enables or cancels the Fax&Copy.

p. 4-19

Security

Enables or cancels the security reception.

p. 9-3

Separator Page

Enables or cancels the separator page.

p. 5-14

Memory Tx

Enables or cancels the memory Tx.

p. 4-3

Auto Rx

Enables or cancels the auto reception.

p. 5-2

F-Code Tx

Used to make an F-code transmission.

p. 6-11

F-Code Polling

Used to make an F-code polling.

p. 6-12

Polling

Used to make a polling reception.

p. 5-11

Dial Prefix

Enters the “/N” symbol.

p. 4-21

Bypass

Used to set the paper size on the bypass tray.

p. 2-16

Page Counter

Displays total printed and scanned page.

p. 8-8

Energy Save

Enables or cancels the Energy save mode.

Online

Cancels PC printing.

*

Mode Switch

Switches the machine’s mode.

p. 2-2

E-mail Gateway

Enables or cancels the e-mail gateway.

p.4-22

* For details of printer settings, refer to the PDF manual on the GDI Printer/Scanner Driver CD

supplied with the machine.

Advertising
This manual is related to the following products: