Muratec MFX-1950 - Manual (Page 36)

1-16 L
ayout
& I
nstaLLatIon
If you make a mistake, press <Cancel> to erase to the left.
To change just one character, press <t> or <u> to move the cursor, press <Cancel> to
erase it. Then re-enter the correct character.
21
Press <Enter>.
TTI 2 ;Upper
_
If you do not want to enter TTI 2, skip to step 23.
22
Use the numeric keys to enter the name for TTI 2.
23
Press <Enter>.
TTI 3 ;Upper
_
If you do not want to enter TTI 3, skip to step 25.
24
Use the numeric keys to enter the name for TTI 3.
25
Press <Enter> to save the setting and continue.
Default TTI selection
26
The machine now asks you to set the default TTI to be shown at the top of faxes you
send.
Usual TTI :TTI 1

/

/Enter
27
Press <q> or <p> to select TTI 1, TTI 2 or TTI 3.
28
Press <Enter> to save the setting and continue.
Eco mode setting
29
The machine will now ask you to set the eco mode.
Eco Mode :On

/

/Enter
Press <q> or <p> to select “On” or “Off”, then press <Enter> to save the setting.
If you select “On”, the setting is complete. Press <Reset> to return to the standby
mode.
If you need to set the “Energy Save Timing” and/or “Scanner Sleep”, select “Off” and go
to step 30.
30
The machine will show the current setting.
Energy Save Mode: On

/

/Enter
Press <q> or <p> to select “On” or “Off”, then press <Enter> to save the setting.
If you select “On”, go to step 31.
If you select “Off”, go to step 34.
31
The machine will ask you to enter the time at which the machine will go into the
energy save mode. It will automatically switch to the energy save mode after your
entered time has elapsed.