Muratec MFX-1950 - Manual (Page 130)

8-2 s
pecIaL features
Soft keys
The soft key is a shortcut key. You can assign a frequent-use function to a soft key which
then activates or deactivates that function by pressing the key.
When the function assigned to the soft key is activated, the light above the soft key will
illuminate. However, in some cases, depending on the function, the light will not illumi-
nate. (See table below.)
The default setting for soft keys differs between MFX-1950 and F-315.
MFX-1950 control panel
Soft key 1 Soft key 2 Soft key 3
Functions you can assign to a soft key
The following table lists the functions you can assign to the soft key.
Function name Descriptions
Light indi-
cation
Reference
page
Sort Copy On /Off setting for sort copying. on 7-5
Combine On /Off setting for combined copying. on 7-8
Zoom Used to adjust a zoom ratio by 1% increments. on 7-4
Broadcast Used to make broadcasting. — 4-12
Address Entry Note 1 Used to enter an e-mail address. — —
Report On /Off setting for print the transmit confirma-
tion report.
on 11-5
Monitor Used to obtain a dial tone for on-hook dialing. on —
Pause /Dial Opt. Used to enter a dialing character. — 3-2
Delayed Used to make a delayed transmission. — 4-13
Batch Tx Used to store a document for batch transmission. — 4-14
Select TTI Used to select the TTI or to disable the TTI on
your transmission.
on 4-17
Select Line Note 2 Used to select telephone line when sending a fax. — —
Cover Page On /Off setting for cover page. on 4-20
Fax Forward On /Off setting for fax forward. on 5-12
Fax & Copy On /Off setting for Fax&Copy. on 4-19
Security On /Off setting for security reception. on 9-3
Separator page On /Off setting for separator page. on 5-14
Memory Tx On /Off setting for memory transmission. on 4-3
Auto Rx On /Off setting for automatic reception. on 5-2
F-code Tx Used to make an F-code transmission. — 6-11
F-code Polling Used to make an F-code polling. — 6-12
Polling Used to make a polling reception. — 5-11