Fax dialing using a macro key, Copying using a macro key, Printing lists using a macro key – Muratec MFX-1950 User Manual
Page 135: Storing fax documents using a macro key, Fax dialing using a macro key -7, Copying using a macro key -7, Printing lists using a macro key -7, Storing fax documents using a macro key -7
8-7
s
pecIaL
features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
s
p
e
c
Ia
L
f
e
a
t
u
r
e
s
Fax dialing using a macro key
To dial a fax number using a macro key:
1
Set the document.
2
Press the macro key in which you have stored the fax communication command.
3
Press <Start>, if you have not registered “Start” in the macro key.
Your machine will perform the operation now, or at whatever time you programmed.
If you programmed this key to delay its operation, the LCD shows:
** Reserved **
Jul 15 2009 1:30pm
If you programmed this key to perform the operation immediately after you press it,
the LCD shows the number:
9-1-972-55-4335
Ltr Mem 99%
Copying using a macro key
To copy using a macro key:
1
Set the document.
2
Press the macro key in which you have stored the copy command.
3
Press <Start>, if you have not registered “Start” in the macro key.
Printing lists using a macro key
To print a list using a macro key:
1
Press the macro key that is programmed for list printing.
2
Press <Enter>, if you have not registered “Enter” in the macro key.
Storing fax documents using a macro key
To store a fax document for either polling or F-Code polling using a macro key:
1
Set the document.
2
Press the macro key that is programmed for the storing operation.
3
Press <Enter>, if you have not registered “Enter” in the macro key.