Muratec MFX-1950 - Manual (Page 126)

7-10 c
opyInG
Duplex copying of a one-sided document
1
Make sure the machine is in the copy mode.
2
Place your document on the ADF face up or on the document glass face down.
3
Press <Advanced Functions> until “Duplex Copy” appears and press <Enter>. Choose
one of the following and press <Enter>.
– or –
Press the “Duplex Copy” soft key and choose one of the following.
“Off”: Cancel the duplex copy.
“L&R”: Binding the duplex copy on the left or right side.
“Top”: Binding the duplex copy on the top.
4
Press <Start>.
To stop copying, press <Stop>.
NOTE: This feature is available only for the MFX-1950.