Answering calls manually, Answering calls manually -4 – Muratec MFX-1950 User Manual

Page 94

Advertising
background image

5-4

r

eceIvInG

faxes

Answering calls manually

NOTE: • To answer a call manually, you must install an external phone to your machine.

• Make sure the document is not set on the ADF.

Receiving a call manually with an external phone

In “Tel Ready” or “Tel/Fax Ready” mode, when the external phone rings, pick up handset:

• If you hear fax tones (“beep — beep — beep”), put the handset down, but do not

hang up. Walk to your machine and press <Start>. After you press <Start>, hang

up the external phone’s handset. Because remote fax machines will wait several

seconds to hear reception tones from your machine, you have about 30 seconds to

walk to your machine and press <Start>.

Switch between the automatic or manual reception mode

1

Make sure that the machine is in the fax mode. If not, press <

copy

4

fax

4

scan

> to

switch to the fax mode.

2

Press <Advanced Functions> until “Auto Rx” appears on the LCD then press <Enter>.

Auto Rx :Off

/

/Enter

3

Press <q> or <p> to select “On” or “Off”.

• To switch to manual reception mode, select “Off”

• To switch to automatic reception mode, select “On”

4

Press <Enter> to save the setting.

NOTE: If you assigned “Auto Rx” to a soft key (page 8-2), you can toggle Manual reception

(Tel Ready) and Automatic reception (you have set) by pressing that key.

Advertising
This manual is related to the following products: