Marantz DV4100 - Manual (Page 12)

14
ENGLISH
General notes
- Depending on your TV and other equipment you wish to connect,
there are various ways you could connect the player. Possible
connections are shown in the following drawings.
- Please refer to the manuals of your TV, VCR, Stereo System or other
devices as necessary to make the best connections.
- Do not connect your DVD-player via your VCR. The video quality
could be distorted by the copy protection system.
- For better sound reproduction, connect the player’s audio out jacks
to the audio in jacks of your amplifier, receiver, stereo or A/V
equipment. See ‘Connecting to optional equipment’.
Caution: Do not connect the player’s audio out jack to the phono
in jack of your audio system.
Connecting to a TV
● Connect the Euroconnector to the corresponding connector on the
TV using the Euroconnector cable supplied
(A).
If your TV is not equipped with a Euroconnector you can select one of
the following alternative connections:
S-Video (Y/C) connection
1 Connect the S-Video jack on the DVD-player to the S-Video in jack
on the TV using an optional S-Video cable
(B).
2 Connect the audio Left and Right out jacks to the audio left/right in
jacks on the TV
(D).
Video CVBS connection
1 Connect the Video out (CVBS) jack to the video in jack on the TV
using the audio/video cable supplied
(C).
2 Connect the audio Left and Right out jacks to the audio left/right in
jacks on the TV
(D).
Preparation
PREPARATION
L R (CVBS)
VIDEO OUT DIG OUT AUDIO OUT S-VIDEO OUT OPT OUT
DIGITAL AUDIO OUT PCM/MPEG2/AC3/DTS STEREO OUT
(Y/C)
I
AUX/VCR
IN
II
TV OUT
TV
C B A D