Magellan GPS Tracker - Manual (Page 19)

Magellan GPS Tracker 9
Input Location Information
A screen is displayed with a list of geographi-
cal regions. Use the UP/DOWN ARROWs
to highlight the region where you are located
and press ENTER.
As you proceed with the initialization
process, you can press QUIT at any time to
return to the previous screen or field.
A list of countries, provinces or states (depending upon which region you
select) will appear. Use the UP/DOWN ARROWs to select and press
ENTER.
The receiver displays the ELEVATION screen with the cursor in the first
character of the elevation field. Use the ARROWs to enter your present
elevation and press ENTER. If you do not know your elevation, press
ENTER.
If this is not the first time you have used your receiver or if it is the
first time but your receiver has already begun acquiring satellite
signals, time and date may have already been received from a
satellite and you will not be prompted for time and date.
Setting Local Time and Date
The cursor moves down to the time field,
ready for you to input your local time. Use
the ARROWs to change the time and to
toggle between AM and PM. Press ENTER.
The GPS Tracker will not automatically change due to daylight
savings. You will have to reset the time using SETUP as explained
in the Customizing section .
The cursor moves to the date field. Use the ARROWs to input the date and
press ENTER.
REGION
ENTER COORD
USA
AMERICAS
EUROPE
ASIA EAST
ASIA WEST
AUSTRALIA
AFRICA
PACIFIC
TIME
34˚06.52N
117˚49.56W
00000FT
09:23
AM