Magellan GPS Tracker - Manual (Page 68)

58 Magellan GPS Tracker
Selecting Light Timer
With the Light Timer function, you can choose the setting for the light
timer. You can choose from ALWAYS ON, 15 and 30 seconds, 1,2 and 4
minutes.
The light timer is a power saving function that automatically turns the
light off. Once the light has been turned off by the timer, it can be
turned on with the next key press. For example, suppose you select the
timer setting for 30 seconds. If you press the light key to turn the light
on, it will remain lit for 30 seconds, as you had selected. With the next
key press, the light will turn on again for 30 seconds. This process will
continue until you press the light key again to turn the light off or turn
the receiver off.
Press MENU, from any screen, highlight
SETUP and press ENTER. Highlight
LIGHT TIMER and press ENTER. A pop-
up menu will be displayed, highlight your
choice and press ENTER.
Selecting the Beeper
You can select the options for when the beeper will sound. Your choices are
OFF, KEYS ONLY, ALARM ONLY and KEYS/ALARM.
Press MENU, from any screen, highlight
SETUP and press ENTER. Highlight
BEEPER and press ENTER. A pop-up menu
will be displayed, highlight your choice and
press ENTER.
Default setting is ALARM ONLY.
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
LIGHT TIMER
ALWAYS ON
15 SECONDS
30 SECONDS
1 MINUTE
2 MINUTES
4 MINUTES
BEEPER
OFF
KEYS ONLY
ALARM ONLY
KEYS /ALARM