Magellan GPS Tracker - Manual (Page 63)

Magellan GPS Tracker 53
7
Customizing (Setup)
Selecting Setup
Setup allows you to initialize the receiver and set system parameters to your
preference.
To view the Setup Menu, from any screen
press the MENU and highlight SETUP and
press ENTER.
Initializing
By initializing your receiver, you establish the initial position for the receiver.
This will enable the receiver to search the sky for available satellites. You will
need to reinitialize if you have travelled more than 300 miles while the
receiver is turned off.
To reinitialize, press MENU, highlight
SETUP and press ENTER. The Setup Menu
will appear, highlight INITIALIZE and press
ENTER. Follow the steps requested to
initialize, as done when the receiver was
initialized the first time (see Getting Started).
MENU
COORD SYS
MAP DATUM
ELEV MODE
PROJECTION
WAYPOINTS
ROUTES
SETUP
SUN/MOON
FISH/HUNT
CONTRAST
ALARM/MSG
SETUP
INITIALIZE
NAV SCREENS
COORD SYSTEM
MAP DATUM
ELEV MODE
TIME FORMAT
NAV UNITS
TEMP UNITS
NORTH REF
LIGHT TIMER
BEEPER
PERSONALIZE
CLEAR MEMORY
NMEA
BAUD RATE
SIMULATE